MCS200HW

The MCS200HW from Endress+Hauser is an advanced analyser system for continuous monitoring of up to 10 IR measurement components in flue gases. All parts that come into contact with the media are heated above the dew point and are therefore protected from corrosion. Internal reference point monitoring enables quick verification of measured values without the use of test gases. The integrated web display and task assistant within the software make operation highly user-friendly. The MCS200HW Ex version ensures reliable emission monitoring even in explosion-hazardous areas.

• Emission monitoring for waste incineration plants as well as power plants and plants with co-incineration, e.g., cement plants.
• Measurement of nitrogen oxides in nitric acid plants

Specifications

• Measuring principle: Interference filter correlation, Gas filter correlation
• Measured variables: CH4, CO, CO2, Corg, HCl, H2O, NH3, NO, NO2, N2O, O2, SO2
• Performance-tested measurands: CH4, CO, CO2, Corg, HCl, H2O, NH3, NO, NO2, N2O, O2, SO2
• Process temperature: ≤ +550 °C
• Process pressure: 850 hPa ... 1,100 hPa
• Ambient temperature range: +5 °C ... +50 °C
• Ambient humidity: ≤ 90 %. Relative humidity; non-condensing
• Degree of protection: MCS200HW – IP54, and MCS200HW Ex – IP65
• Product safety: CE.

Device properties:

• Measurement of up to 10 IR measurement components plus O2 and TOC.
• Wear-free gas distribution through ejector pumps.
• Internal reference point monitoring with internal calibration cells
• Web server for platform-independent device control.
• Use of dry test gases for HCl and NH3.
• Classification for ATEX Zone 2, IIC T3 gb.

Benefits

• Only one analyser system required for simultaneous continuous monitoring of up to 12 gas components.
• Convenient, task-oriented operation.
• Remote access without additional software.
• High availability and reliable performance in flue gas emission monitoring systems.

Endress+Hauser (India) Pvt Ltd. Email: [email protected]

[email protected]