WirelessHART Adapter SWA70

Endress+Hauser Smart WirelessHART interface module with power supply for field devices.

The WirelessHART Adapter SWA70 is an interface module for the wireless transmission of 4 to 20 mA/HART signals from connected field devices to a WirelessHART Fieldgate. It is powered by either a battery pack or power supply units. The WirelessHART Adapter can be used in hazardous and non-hazardous area for applications.

• Process optimisation: Monitor and optimise plant sections with less cost and effort by connecting the WirelessHART Adapter.

• Level monitoring in tanks and silos: Measured value, device and battery status are transmitted at regular intervals to a higher-level system.

• Plant condition monitoring: Wireless devices are mounted at critical points in the plant with limited accessibility or where wiring costs are limited. Improved data flow and diagnostics increase plant reliability and safety.

Benefits

• HART devices are quickly upgraded to WirelessHART technology

• Fast integration of 4 to 20 mA field devices into a WirelessHART network

• One 4 to 20 mA field device and up to four HART field devices in multidrop mode can be connected to a WirelessHART Adapter

• Burst mode and event notification supported

• Remote and difficult-to-access HART devices are connected to the control room without expensive cabling, and

• Easy planning, quick installation and integration.

Specs at a glance

• Output: WirelessHART communication interface

• Transmission rate: Nominal 250 kBits/s

• Operating frequency: 2.4 GHz (ISM band)

• Transmission range under reference conditions: Outdoor 250 m, indoor 50 m

• Display: Integral via 3 LEDs

• Measuring principle: WirelessHART

• Function: Intelligent WirelessHART interface module for connection to 4...20 mA/HART devices

• Certification: Non-hazardous area ATEX, CSA, IEC Ex, JPN Ex

• Input: One point-to-point with a HART device, or One point-to-point connection with a 4...20 mA device, or Up to four HART field devices connected in multidrop mode if a wide range power unit is used.

• Output: WirelessHART communication interface

• Transmission rate: Nominal 250 kBits/s

• Operating frequency: 2.4 GHz (ISM band)

• Transmission range under reference conditions: Outdoor 250 m, indoor 50 m

Endress+Hauser (India) Pvt Ltd. Email: Poonam.poladia@endress.com

marcomm.in.sc@endress.com